Edgecore Networks

Follow these steps to configure your Edgecore router for a Cloud WiFi Hotspot using the provided settings.

Login to the Router.
Access the router’s web interface by typing the router’s IP address into a web browser.
Log in using your administrator credentials.

Configure Redirect URL.
Go to the Captive Portal settings or a similar section in your router’s web interface.

Set the Redirect URL to:
https://wifihotspot.io/login/edgecore

This will ensure users are directed to the proper login page.

Configure RADIUS Settings
Navigate to the RADIUS settings in the router’s interface.
Enter the following RADIUS server information:

RADIUS Server IP: 13.92.228.228
RADIUS Shared Secret: Contact our office

These credentials allow the router to authenticate users and manage bandwidth.

Set External URL in General Login Page
Under the General Login Page or Hotspot Settings, configure the External URL for login:
https://domain/…

Install SSL Certificate
Install an SSL certificate on the router to avoid SSL warnings when users connect to the WiFi network.

To do this, navigate to the Security or SSL settings section.

Follow the router’s specific instructions for uploading and activating the SSL certificate.

Note: Installing the SSL certificate is critical to prevent security warnings during login.

RADIUS Attributes for Bandwidth Control
The RADIUS server can control the following attributes for connected users:
Download Speed
Upload Speed
Session Time
Bandwidth Data Usage

These attributes allow you to manage and enforce specific bandwidth policies for users on the network.

Important: Redirect to external URL is not available as not supported by router.

Updated on December 2, 2024

Was this article helpful?