TeltonikaThis article describes the installation and configuration steps for Teltonika APs. Our test was performed with Teltonika RUT240 AP.
Open the web browser and go to 192.168.1.1 to login to the Teltonika WebUI.
Username: admin
Password: admin
Teltonika routers can be configured using the Hotspot option, like any other UAM based device.
Be sure and as Hotspot model select UAM based routers during WiFi location configuration on the Start Hotspot portal.
Configuration
Configuration
To enable and configure the Hotspot, go to the Services tab and click on the Hotspot section.
Once you’re there, click the Edit button located next to the Hotspot instance.
After this, you will be redirected to Wireless Hotspot Configuration window.
Other details should be the same as at the screen bellow.
Configuration profile: Custom
Enable: Enabled
Logout address: 1.1.1.1
Authentication mode: External radius
Authentication protocol: CHAP
Terms of service: Enabled
Radius server #1: 13.92.228.228
Radius server #2: 13.90.247.200
Authentication port: 1812
Accounting port: 1813
Radius secret keys: Contact our office
UAM port: 3990
UAM port: 4990
NAS Identifier: Set your router MAC address in format 00-00-00-00-00-00
Swap octets: Enabled
External Landing page: Enabled
Landing page address: https://wifihotspot.io/login
HTTPS to landing page redirect: Disabled
Use custom DNS: Enabled
DNS server 1: 8.8.8.8
DNS server 2: 8.8.4.4
In the Walled garden section add following domains and Save changes.
wifihotspot.io
cdn.wifihotspot.io
starthotspot.com
cdn.starthotspot.com
cdnhotspot.azureedge.net
t-msedge.net
static.cloudflareinsights.com
13.92.228.228
13.90.247.200
If you need help with configuration, please go to starthotspot.com and contact our tech support. We’ll be glad to help you.